1. Low formaldehyde release urea-formaldehyde glue;

It accounts for about 30% of the total amount of synthetic adhesives in my country. With the improvement of people's living standards and the enhancement of environmental awareness, the environmental protection requirements for artificial plates will be higher. Therefore, the market potential for low formaldehyde release urea-formaldehyde adhesives is huge. At present, foreign companies have produced urea-formaldehyde glue with low formaldehyde emission in my country, and established large-scale wood processing plants.

2. Hot melt adhesive;

The organic flux is not used, and the construction is fast and the bonding effect is good. It is the fastest growing rubber species in my country in recent years, and it is also the future development direction. In addition to traditional EVA hot-melt adhesives, there is an urgent need to develop new varieties of polyester and polyamide hot-melt adhesives in China.

3. Polyurethane adhesive;

It is widely used in shoemaking, packaging, construction, automobile and other fields, and because of its excellent performance, it is considered to be one of the most promising rubber species in China. In developed countries, all shoe-making adhesives are polyurethane adhesives, packaging composite films are all using polyurethane adhesives, and special adhesives such as magnetic tapes are also using polyurethane adhesives, which shows their wide application.

4. Organic silicone adhesive;

In developed countries, silicone sealants are mainly used for building seals. In the next few years, silicone sealants will also become the leading type of sealants for construction in my country.

5. High performance epoxy resin adhesive;

Epoxy resin adhesives for the electronics industry and epoxy structural adhesives for the construction industry are difficult to produce, and the quality of domestic products is poor. At present, they mainly rely on imports. It is estimated that the domestic consumption demand frost in this area will greatly exceed the average growth rate.

6. PVC plastic melt adhesive for automobile;

PVC plastic melt is the main sealant for automobiles, accounting for about 1/3 of China's automotive adhesives, the current annual demand is about 10,000 tons, with the development of China's automobile industry, especially the car industry, PVC plastic melt must Broad development prospects.