Thermal paste is one of the materials used to fill the gap between the CPU and the heat sink. This material is also called thermal interface material. Its function is to conduct the heat radiated from the CPU to the heat sink, keep the temperature of the CPU at a stable working level, prevent the CPU from being damaged due to poor heat dissipation, and extend the service life.

Thermal paste (silicone grease) is a new type of organic grease specially made for the heat transfer of electronic components. It is produced with a special formula and is compounded with a metal oxide with good thermal conductivity and insulation and organosiloxane.

1.Good thermal conductivity and electrical insulation, shock absorption and impact resistance.

2. Very good use stability, low consistency and good construction performance, wide operating temperature range (-50℃~+250℃, different models have different temperature ranges), heat resistance, will not dry up at high temperature, Does not melt.

3. It is non-corrosive to related materials, non-toxic, odorless, and resistant to chemical corrosion.

4. Outdoor use can avoid the adverse effects of ultraviolet light, ozone, moisture and chemicals.

Instructions:

1. Wipe (wash) the coated surface to be free of impurities; use a spatula, brush, glass rod or syringe to directly coat or fill.

2. During use, a small amount of air may be entrained, and the foam can be discharged by standing, pressurizing or vacuuming.

3. How to apply thermal grease, there is not a very standard statement, but there is a rule, the key to applying is to be uniform, no bubbles, no impurities, as thin as possible.