1. Oil storage:

1. Do not stand upright in the open air environment to prevent the intrusion and pollution of moisture and debris

2. Indoor storage can be placed upright with the barrel facing up for easy extraction.

3. Tighten the sealing cap to keep the oil drum sealed.

4. Keep the barrel clean and clear.

5. Keep the ground clean to facilitate timely detection when oil leaks.

6. Do a good job in storage registration, first come first served.

7. The frequently-extracted oil products are placed on the oil drum rack to control the discharge with a switch.

8. New oil and waste oil are placed separately, and the container with used oil should not be filled with new oil to prevent pollution.

2. Notes on fire prevention for oil storage:

1. Oil products are stored separately, and no combustible products should be placed around them.

2. Pyrotechnics are strictly forbidden, and it is forbidden to carry fire into the oil depot.

3. Equipped with no less than two fire extinguishers.

4. The oil cloth or cleaned oil stains after wiping the machine must not accumulate to avoid combustion.

5. Separate and store flammable special oils or chemical solvents and place flammable signs.

3. Precautions for use:

1. Consult a lubrication expert, use appropriate specifications of lubricant, and minimize the type of oil used.

2. Each machine shows the parts that need to be refueled in a simple drawing, the name of the oil product, the refueling cycle, etc. and is assigned by a special person to avoid using the wrong oil product.

3. Clean and wipe containers and tools such as oil pump and oil pot before refueling each time.

4. Each kind of oil-specific container, and indicate the name of the oil-containing product on the container to prevent pollution.

5. Before changing the oil, the mechanical solvent must be washed away, and water-soluble cleaning agents must not be used.

6. After every addition or replacement of lubricating oil, make a mechanical maintenance record.

7. If it is found that the oil product is abnormal or the oil change period has been reached, it should be sampled and submitted to a professional company for laboratory verification.

Fourth, environmental protection and health considerations:

1. It is strictly forbidden to drain waste oil directly into the ditch and pour it into the soil to prevent environmental pollution.

2. The waste oil and waste liquid are collected in special barrels and then handed over to the recycler approved by the government for recycling.

3. People with skin allergies or scratches should avoid direct contact with lubricants.

4. Do not wear clothes that have penetrated with oil stains, and do not place fragments contaminated with oil into bags.

5. Do not use dirty cloth to wipe off the oil on the skin, to prevent the metal scraps in the cloth from scratching the skin and causing infection